AirVolution Kayak FAQ

Find the answers to your questions below!


The Airvolution is a low-profile, open-cockpit/open-deck style, sit-inside kayak. The AirVolution is best suited for recreational and day touring use. Lakes, Bays, Inland Waters, Slow Moving Rivers (Class I-II), and Coastal Waters.

It really depends on how you like to paddle. Are you a traditional paddler that paddles with their knees bent, or do you want your legs straight out? Here’s a pic of a 6’2″ person’s legs in the single-person Airvolution. As you can see, he can sit with his legs straight out. In the second pic, you’ll see that a paddler can also place their feet flat on the floor of the kayak and bend their knees. So, a person taller than 6’2″ could paddle the kayak comfortably with their knees slightly bent but, if you are taller than 6’2” and want to paddle with your legs straight out, you’ll want to go with the Airvolution2. It should also be noted that this is a general rule of thumb as everyone’s legs and torso vary, so some people at 6’2″ or taller may have longer legs than others and want more room.

Airvolution Kayak leg room

Yes. The paddler can shorten the upper seat straps and use the d-rings on the side wall of the cockpit and then attach the lower seat straps to the d-rings on the floor behind the seat.

Airvolution 2 Seating

With drop-stitch material, the upper and lower panels of tarpaulin (the outer skin that you see) are held together with thousands of threads – this allows the bladders to be inflated to high pressure. In order to insert the valve and pressure relief valve into the drop-stitch material, some of these threads need to be cut away at that spot, creating a bump on the opposite side of these valves. Additionally, to create the V-hull shape at the boat’s entry, threads are also cut away to create this form. This should be of no concern as this is part of the construction process which we have been doing for many years.

Airvolution Bumps
Drop-Stitch Construction

The Airvolutions do not have a ton of storage space below deck but this was not the intent of this design. The Airvolutions (single and tandem) are designed to be Recreational/Day Touring kayaks meant for shorter trips in a day. So, while there are smaller compartments under the deck, both fore and aft, these spaces are really meant for a dry bag of small items that someone might take out with them for a day of paddling. So, the bulk of your gear storage would be on the deck of the kayak, fore and aft.

AE3029 Airvolution: Folded Size: 34″ X 19″ X 11″ / Duffel Size: 40″ X 18″ X 12″
AE3030 Airvolution2: Folded Size: 38.5″ X 19.5″ X 7″ / Duffel Size: 44″ X 19″ X 16″

Yes! The duffel bag easily fits the kayak, pump, seat/s, and repair kit.
There’s also a front pocket for stowing the fin and there’s a side mesh pocket for carrying paddles.
Paddles sold separately.

Not at this time, but it’s on the list!

Not at this time, but it’s on the list!

Safety of course is our top priority and regulations/guidelines, as mandated from both the US Coast Guard and the National Marine Manufacture’s Association (NMMA) are always reviewed. While many of our kayaks are constructed of more than 2 main air chambers, this is not the case for all…The AdvancedFrame Sport or Ultralite are good examples of this. Additionally, all inflatable SUPs are only 1-chamber. Most all pack rafts are 1 chamber as well, and some popular collapsible kayaks have no air chambers at all. However, if you wanted to increase the chamber count to 3-4 for some reason you could easily add an additional air chamber under the deck with a buoyancy bag if you so desired.